How To Measure A Refrigerator Top Full Guide 2022

How To Measure A Refrigerator Top Full Guide 2022
  • Paul Kahan

Do you want to build a cabinet to fit your new refrigerator? This tutorial will show you How To Measure A Refrigerator. How do you measure a stainless steel refrigerator? This helped you. Publican Anker is here to answer all your questions.

Publican Anker is renowned for its quality articles and quick information. We will treat any problems you have with appliances gently. Keep checking back for more information. Use the instructions carefully.

What Am I Looking For?

When trying to find the size of your stainless steel refrigerator, it is important to understand what number you are looking for.

Side By Side refrigerators is measured in CuFt. This number will most often range between 10 and 35. This number will be a minimum of 18.

What is the Standard Refrigerator Size?

1. Bottom Freezer Refrigerator

  • Height: Between 67 and 70 inches
  • Width: Between 29.5 and 32.75 inches
  • Depth: Around 33.38 (33 3/8) inches

2. Top Freezer Refrigerator

  • Height: Between 61.75 and 66.25 inches
  • Width: Between 28.75 and 32.75 inches
  • Depth: Around 34.25 inches

What is the Standard Refrigerator Size

3. Side-by-Side Refrigerator

  • Height: 65.88 (65 7/8), to 71.25 in
  • Width: Between 32.75 and 39.75 inches
  • Depth: Between 28.75 and 34.25 inches

4. French Door Refrigerator

  • Height: Between 67 and 70.13 (70 1/8 inches)
  • Width: Between 29.5 and 36 inches
  • Depth: From 29.38 (29 3/8) to 34.63 (34-5/8) inches

As You Shop…

Before narrowing down your choices, you should first measure the space that you intend to use with your new appliance.

You will need a tape measure to measure the height, width, and depth of your space. These measurements should be recorded in inches so you can refer back to them when you browse our online catalog or visit our in-store selection.

You’re probably familiar with online shopping. It is possible to filter through catalogs based on your personal preferences, such as cost range or brand. You can also filter our Big Sandy Superstore catalog using the following filters:

  • Appliance Fit Width
  • Capacity Total
  • Height
  • Depth

Hover over the results page’s left pane and click on the “+” buttons to expand the filter options. You can then mark your preferences and narrow down your search to those that meet your criteria.

These are some shopping considerations. Here’s how to measure space using a tape measure.

How to Measure Refrigerator Space

Step 1: Measure the Perimeter for Ventilation Space

As we mentioned, your first set of measurements should indicate the total space you intend to use with your new fridge.

The stainless steel refrigerator capacity must allow air to circulate to ensure that it runs efficiently and lasts its entire life span. According to industry experts, stainless steel refrigerator dimensions should be at least two inches from its back wall. It also needs one inch of overhead space and the eighth inch on either side.

When you shop our inventory, these minimum clearances can be subtracted from your initial measurements to determine the maximum dimensions of new fridge models that will work with your kitchen.

It is good to check the manufacturer’s recommendations for ventilation space for each option and adjust your measurements accordingly. Also, consider other considerations, such as whether you will need to add water lines. You can find this information on our product pages, which you will see as you scroll down.

Step 2: Take Careful Considerations of the Fridge Door

How to Measure Refrigerator Space

We are certain you have guessed that the maximum width of your refrigerator refers to the maximum width your bottom freezer fridges can be. This is the minimum width your new refrigerator door can fit comfortably between your cabinets, stainless steel, and the wall.

It is also important to make sure the door outswing (for French-door refrigerators or bottom-freezers) and the freezer drawer path are clear.

This means that you must ensure there is enough space in front of your counter-depth refrigerator to store the unit when it is opened. Do the doors block the cabinets on either side of the fridge?

To ensure that you can stand upright in front of the side by side refrigerators with their compartments fully open, observe your body position.

The height of the stainless steel refrigerator’s top is important when shopping for a standard-depth model. Because the hinges are located on the fridge’s front, they rarely interact with enclosures or cabinets; this measurement is more relevant. The hinge height is important for counter-depth refrigerators.

We’re merely saying that when you take measurements, ensure you can open and close the fridge compartments easily.

Step 3: Strategize the Delivery Path

You should also measure the dimensions of the standard depth refrigerator.

When you are tracing this path, avoid steep turns and staircases as much as you can.

It is a good idea to measure the width and height of hallways and doors. Your fridge should clear these. If your fridge does not allow for this, you can try another less complicated route that has fewer obstacles. Temporarily remove the hinges from doors and other obstructions like side tables, rugs, and sitting furniture.

Step 4: Install!

You are now ready to purchase and install your appliance once it arrives. If you prefer to use our delivery and installation services or the manufacturer’s instructions are what you want to follow, we’ll let you know.

Bonus: How to Move a Refrigerator Out of a Tight Space

It takes some effort to reap the benefits of a new fridge. You will need to figure out how to transport and install your fridge and get it out of your home.

When you move the empty fridge, use a floor protector to protect your kitchen floor. You can also use felt furniture slider pads. You can also use felt furniture slider pads to help you lift your standard depth refrigerator from its tight spot.

Next, slide the fridge away from the wall. After the fridge has been removed from its surroundings, you can decide if you need to safely take out adjustable shelves, doors, and hardware before attaching it to an appliance doll and removing the fridge.

Contact Big Sandy Superstore for all your questions about refrigeration appliances. We are happy to assist you, whether you call or visit our store. Get the kitchen of your dreams by shopping today.

Maybe you also like:

FAQs

Will a 36-inch refrigerator fit in a 36-inch opening?

The manufacturer recommends that a refrigerator 36 inches in width be placed in an opening no wider than the recommended size. Appliances are not built to machine shop tolerances, and cabinets are not.

How do you figure out cubic inches of a refrigerator?

If you have a 30 inches wide, 30 inches deep, and 48 inches high fridge, multiply 30 X 30 X 48. This will give you 43200. Divide 43200 by 1728 cubic feet. This will give us 25 cuft, which is a decent-sized side-by-side fridge.

What is the most common size refrigerator?

A professional-grade refrigerator is typically between 30 and 36 inches wide, 67 to 70 in height, 29 to 35 in-depth, and between 30 and 36 inches. The interior should have between 14 and 20 cuft.

How many cubic feet is a 36-inch refrigerator?

Top-mount refrigerator/freezer units are approximately 23 to 36 inches wide, 65 to 69 inches high, and 24 to 33 inches deep. It will also have an interior volume of between 10-25 cubic feet and 7.5-18 cubic feet in the fridge.

Read on: https://homeguides.sfgate.com/dimensions-standard-size-refrigerator-82262.html.

Conclusion

This is one of the most popular methods for accuracy and speed. To make a cabinet of medium size, you can determine the dimensions of the french door refrigerator. This will allow you to determine if the top freezer refrigerators’ position is appropriate. This tutorial is so helpful! Publican Anker also offers related articles that will save you time and effort. You can find more information on our website.

Leave a Reply

Your email address will not be published.