Is a counter-depth refrigerator suitable for you? Our guide covers all you want to learn about these slick, modern appliances, including their advantages and style choices.
You have probably noticed counter-depth refrigerator versions in newer, remodeled, or updated kitchens. These kinds of refrigerators are very popular because of their compact looks.
Thus, What Is Counter Depth Fridge?
A counter-depth refrigerator matches your kitchen countertops (24-25 inches), and so has a shallower depth than conventional grills (35-36 inches).
To compensate for their thinner thickness, counter-depth fridges are usually wider and somewhat taller than conventional fridges.
What Is Counter Depth Fridge?
“Counter-depth” is the space between your rear wall or backsplash and front of the counters, which is normally 24-25 inches.
A counter-depth fridge has approximately the same thickness as the kitchen countertops, so the front part of the refrigerator contrasts with their countertops’ advantage.
To put it in perspective, most standard-depth grills tend to be over 30 inches deep, frequently measuring 35-36 inches. That means in most kitchens. The fridge can stand out half of a foot or more from the border of their counters.
Together with all the foot traffic that a hectic kitchen sees, maximizing aisle area is indispensable. This is why you may wish to consider moving counter-depth to care for your loved ones.
The Term Counter-Depth Could Be Misleading
Though widely used amongst retailers, the expression counter-depth may be misleading since the actual measurement may vary somewhat in the normal counter thickness of 25 inches.
Especially in a huge kitchen, it is not strange to discover underside cabinets that are a lot deeper than the conventional 24-inch thickness. Also, the counter will protrude farther, usually by an inch.
So counter-depth could be heavier than the typical, which ranges from 25 to 30 inches.
Hence, the significance of taking cautious, exact dimensions of the allowable area while looking for appliances. Please do not assume that all counter-depth grills will be the same size; they could vary in thickness by several inches.
These are often known as cabinet-depth if it comes to compact, under-counter refrigerators, coolers, and freezers. However, these may vary in the standard. Many will probably be 24 inches to be flush with the chimney once installed, substantially like a built-in dishwasher.
Most freestanding wine coolers are counter-depth, which leaves a counter-depth versus normal depth choice mostly applicable to freestanding refrigerators, freezers, and drink coolers.
Most vertical freezers are standard thickness, but freezers intended to be custom set up as a companion into a fridge tend to counter thickness for a more integrated fashion.
Considering that the pros and cons will probably be like all these appliances, this guide will concentrate more on refrigerators.
Is a Counter-Depth Refrigerator Best For You?
When deciding upon a counter-depth refrigerator, the idea would be to get a more close look-which in itself is quite pleasing to the eye. This layout style is readily available for all sorts of the dishwasher -all fridge, top or bottom freezer, side-by-side French door versions.
They’re sometimes higher and generally wider than conventional thickness models of the identical capacity, which might be something you will want to consider when installing a brand new fridge.
Although the counter-depth layout is a highly common option and as this is a long-term appliance investment, you will want to consider the advantages and the constraints to this fridge version.
Also, say that the doorway of a counter-depth refrigerator will protrude slightly from the edge of the counter, and the same is true for the grip. Therefore depth may not incorporate these in the dimensions.
- A more compact appearance. Many will select a counter-depth fridge because this fashion gives the kitchen a more uniform profile. The fridge doesn’t protrude several inches beyond the counter.
- More convenient access to materials. Finding and retrieving contents out of a counter-depth fridge is a lot simpler. It takes less prolonged bending. And the same is true for the freezer. You will also enjoy the greater accessibility when it has to do with refrigerator cleaning also.
- Better traffic circulation; less function triangle congestion. When a fridge is standard thickness, it’ll be thicker than neighboring countertops and cabinets, occasionally protruding into the primary traffic area. That may make a bottleneck of types in that kitchen area.
- Unique storage chances: As a counter-depth model will probably be wider than the same capability in a standard depth unit, that occasionally allows storage of broad cold cut trays, something which may be impossible using a thinner refrigerator. The same applies to more door bins that may be simpler to arrange and accessibility.
- If a conventional style fridge is a choice, obtaining the entire inside of a door-access bottom freezer will be easier. A pull-out bottom freezer drawer may have a shorter thickness that’s a lot nicer concerning the required space to start it.
- A broader profile. For a given ability, a 25-inch counter-depth fridge will probably be wider than the standard standard-depth version. If you are replacing a present standard-depth refrigerator with a counter-depth version, you might have to check out a lower capability to fit inside the present space.
- While accessibility is greater, drawers like crispers and deli pockets are somewhat briefer. This makes a difference if storing long items like plastic storage containers or trays in those areas.
- Freezer compartments hold less. Whether the freezer is a base drawer or high bracket, anticipate less capacity. But, accessibility to frozen foods is significantly more suitable.
- The only door swing will need more clearance to get a broader layout.
The Way to measure for a counter-depth fridge
Are you prepared to make the most of the advantages of a counter-depth refrigerator? First, you will have to assess your kitchen area attentively to obtain a model using the best match. Follow the advice below to find precise measurements for your counter-depth refrigerator.
Begin at the wall (maybe not the backslash) and step to the border of your countertops. Your counter-depth dimension should be approximately 24-25 inches. Make sure an inch of distance between the rear of the fridge and the wall to get proper refrigerator ventilation.
While purchasing, review each of the thickness measurements provided for counter-depth versions, such as thickness with drawers and doors open. In case you’ve got a kitchen island, then ensure the refrigerator drawers and doors may open without hitting any obstacles.
Measuring the width
Begin by measuring the diameter of your cupboard cutout at its narrowest point. Subtract an inch out of your width dimension to permit a half-inch of distance on all sides of the refrigerator to get proper ventilation.
If one side of the fridge will be alongside a wall, then leave two 1/2 inches between the wall and the hinge side of the door so that it could swing open.
If you presently have a standard-depth refrigerator, you can anticipate your new counter-depth refrigerator for somewhat wider. Counter-depth refrigerators are generally wider than conventional fridges to compensate because of their thinner thickness.
Begin by measuring from the ground to the base of any cabinets which will be over the refrigerator. After that, subtract a half-inch in the dimension to ensure proper venting for your refrigerator.
Counter-depth fridges are usually somewhat taller than standard-depth versions to provide a comparable ability. To learn more about refrigerator dimensions and measurements, have a look at our fridge sizes directly.
When you’ve your width, height, and thickness measurements, you are all set to locate a counter-depth fridge with the ideal match for the kitchen and the ideal features for your loved ones.
See Also: Counter-Depth Refrigerator Dimensions
COUNTER-DEPTH REFRIGERATOR STYLES
The French door design fridge has two doors on the top and a deep freezer drawer under. The French doors open out to show one big refrigerator space indoors.
Opening and shutting the doors in a French door fridge normally requires less clearance than one door on a conventional top-freezer refrigerator. Because of this, French Door refrigerators are acceptable for smaller kitchens.
Side-by-side refrigerator versions have two doorways extending the full height of the refrigerator. One side is the fridge, and another side is the freezer.
A more conventional design, the top-freezer fridge features a freezer and a refrigerator under. The fridge and freezer doors may open to the left or right, depending on the design you select.
Bottom-freezer fridges include a fridge in addition to a freezer door or drawer beneath. It is comparable to a French door design in this manner but has a single fridge door rather than 2. Based on the design, the fridge door may open to the left or right.
It is possible to discover counter-depth toaster inside-by-side door, top-freezer, and bottom-freezer fashions using a thinner depth.
You could even locate counter-depth, high – or bottom-freezer refrigerators using a narrower width to provide you more room in a little kitchen. With so many styles to pick from, you are bound to discover the perfect counter-depth fridge to your kitchen.