- Paul Kahan
The battle is on! Are you a fan of the Kodi Cooler Vs Yeti? Read this blog post and decide for yourself. This post will explore both their pros and cons so that you can make an informed decision. We’ll start with the Kodi quart cooler first.
Many people like it because it’s light, which makes it easy to move from place to place, and because it’s usually not too expensive. It also comes with a guarantee that lasts a lifetime in case anything breaks or goes wrong with it in the future.
Kodi Cooler Overview
Kodi Coolers are the first coolers in the world that were made with Kodi and other HTPCs in mind. The Kodi Cooler is a small quart cooler that doesn’t use liquid or fans to get rid of heat from the CPU. Instead, it uses passive cooling. It can be installed in any orientation, even on an upside-down motherboard.
The Kodi quart Cooler has unique features, including dual USB pass-through ports (1 USB 2, 1 USB 3) and a USD card slot.
A control button that lets you turn your PC on or off from a distance, LED lights, and heat sink fins. So that it helps keep RAM chips and hard drives cool, and rear exhaust vents. Besides that, they can be used with the 120mm fan filter brackets that are included if you need more air. Several different models are available with a capacity of 7 to 20 Liters.
Yeti Overview
Thermaltake’s Yeti can be used in computers, game systems, and other electronic devices. It uses liquid cooling and multiple 120mm fans to move heat away from the CPU.
It has some unique features, like the ability to pump up to 1000L/h (26.4G). And a design with multiple heatpipes for better heat transfer. Moreover, it has compatibility with most motherboards and a flexible mounting kit that makes it easy to put in any case without cutting.
The Yeti Tundra supports Intel and AMD processors as large as 220W TDP or more via its dual 8-pin CPU connector.
Kodi Cooler Vs Yeti: Full Comparison
Below is a detailed side-by-side comparison chart of Kodi Cooler vs. Yeti.
Design
The Kodi Cooler features an all-aluminum construction with a black powder-coated finish. It weighs in at just over 1lb and measures 6″ x 4.5″ x 2.6″. The Kodi Cooler uses passive cooling to move heat away from your CPU. It does this with a copper base, metal fins, and thermal transfer pads for the best heat transfer.
On the inside of the more excellent, there is room for two 2.5″ drives or one SSD drive up to 9mm thick. There is also room for a 120mm fan if needed, which can be controlled by the Kodi Cooler’s built-in fan driver. Still, its passive design doesn’t include any air vents. If you need more ventilation, you can add them yourself (screw holes are already there).
The Kodi Cooler has one USB 2.0 port and two USB 3.0 pass-through ports. It also has a spot for a USB card and two USB 3.0 pass-through ports. The USB 2.0 port can be used to connect extra items, such as an external fan controller or flash drive/card reader.
You can place the Kodi either vertically (upside-down on the motherboard) or horizontally using the mounting kit that comes with it. And this kit works with most standard case designs, such as full-size ATX cases and smaller desktop cube-style enclosures.
The Yeti is made of all aluminum and has a simple design like CPU fans like the Noctua NH-U14S – yeti vs Noctua cooler.
The Yeti Tundra weighs in at just over 7lbs (4kg) and measures 6.7″ x 5.9″ x 3.2″. The Yeti cooler uses liquid cooling with a copper base plate and four heat lines to move heat away from the CPU. It does this with a number of 120mm fans.
The Yeti is easy to set up because it comes with an AMD/Intel bracket that connects straight to your motherboard. You slide it in place onto your case or open-frame chassis – no drilling required!
Using parts from Amazon and other online stores, you can connect up to two different radiators together to make two water cooling lines. The Yeti supports Intel and AMD processors as large as 220W TDP or more via its dual 8-pin CPU connector.
The Kodi Cooler comes in 3 different models, the 7 Liter V2, 10 Liter (reviewed), and 20L. The Yeti is also available in multiple other capacities, including 1250M (21.3G), 900M (16.6G), and 750M (13.8G).
Maybe you need to know:
Durability
The Kodi Cooler is made of high-quality metal and has a powder-coated finish that is all black. The best cooler is simple and doesn’t have any springs or plastic parts that could break. But if you touch the drive pins directly, they can bend a little. This is rare, though, because the pins are set back into the case.
If you want a stronger option, you can pick from some other designs made by different companies. For example, the Jonsbo CR-201 (you can find it on Amazon) has a tough aluminum top and bottom and strong steel drive pins. It can even hold drives that are as thick as 12mm!
Many users say that their Kodi Coolers don’t cause their CPUs to overheat, even when they boost their CPUs by a lot more than the stock settings.
The Yeti bottle openers are made of metal and have special pipes that help to keep things cool. They work just like the Kodi Cooler.
The design of the bottle opener is very solid, and there are no plastic parts. It doesn’t have any of the problems with durability that were mentioned above. It is also already put together, which can be a plus for some people compared to other custom water-cooling designs like the ones EKWB makes.
The Yeti, however, is much heavier at just over 7lbs compared to 1lb for Kodi Cooler (including fan). While many users say it’s easy to open and close their cases or chassis, even when they have a big graphics card in them, this is not always the case.
SSDs and other devices add to the weight of the Yeti. Users with smaller cases or who can’t lift more than 10 pounds may have trouble with its weight.
Also, since it doesn’t have drive pins, you have to be careful when opening and shutting your case so you don’t pull or push too hard and stress the lines.
Ice Retention
The Kodi Cooler is made primarily of aluminum that does not hold ice and the Yeti’s stainless steel body. The rest of the plastic parts are less protected than the Yeti, so they tend to melt ice more quickly.
Both designs can keep ice for 6–12 hours, based on the temperature of the air around them, the size of the room, and the user’s preferences. This is lower than other models such as the Chiller 3.
Special Features
Both coolers work pretty much the same way. A special part called an AMD or Intel bracket holds a block. So that it connects to the brain of your computer and some tubes to a water pump go through your computer box and into one or two places called radiators. These radiators have fans to keep everything cool.
Since the bottom of both the Kodi Cooler (Kodi11) and the Yeti is made of metal, they are better at keeping heat than coolers with steel or plastic bases.
The Yeti is shaped like a tube, which gives it a lot of surface area for cooling and keeps parts and devices from getting in the way.
The Kodi Cooler is different because it comes with a fixing bracket for up to two 120mm fans. On the other hand, the Yeti has more room for cooling components like the radiator, fans, and water blocks like the EKWB Titan X Pascal – rx480 g1 Gaming.
Because of this, you may be able to squeeze even further performance out of your Yeti. However, this will require extensive modification to either your best cooler or case.
Conclusion
Choosing a cooler is never easy. There are many options to choose from, and it can be challenging to know which one will work the best cooler for your needs. In this article, we’ve done the research, so you don’t have to! We’ve compared two of the most popular coolers on the market today- The Kodi Cooler vs. Yeti.
It’s worth noting that both of these products come with their pros and cons. If you want to know more about either product or how they compare, you can visit Publican Anker. Where you can find a lot more in-depth information.
